SAVAGE MODEL 10 VS 11 SERIES

I'm not sure if my tool is an anomaly or they did a run of them with this problem.

I had another lapping tool on hand designed for Garands and M1As, so I pulled the plunger out of that one and installed it in the Savage tool. The lapping tool I was using was brand new and I discovered the spring-loaded plunger was just a wee bit too short to apply pressure to the bolt face. We installed a Brownell's bolt lapping tool on to the receiver, applied some lapping compound to the locking lug seats and installed the bolt, working it to lap the lugs. We only need the bolt body, bolt handle and bolt head for the next step. Now that the rifle is apart we will strip the bolt of the ejector, extractor and firing pin assembly. A Remington 700 action wrench head will fit the Savage and that's what I had on hand. To accomplish this task you will need a barrel nut wrench, an action wrench head to fit the receiver and a sturdy vise to hold the action while you loosen the nut. with a heavy fast-twist target barrel.Р”Р‡irst, we need to remove the factory barrel. The customer, who is a target shooter, wishes to re-barrel it to 6mm Rem. This is a typical blued basic hunting rifle like you would purchase at a big-box retailer. The rifle on the bench is a standard Model 11 short-action repeater in. There are a few tools and things to consider if you wish to re-barrel your own Savage rifle. 'Drop-in' barrels are available from a multitude of barrel makers in different weights and lengths to suit any need. Once you have a receiver you can build it in virtually any caliber you desire by swapping bolt heads and barrels. They are an extremely good value, usually very accurate and the modular design lends itself to barrel and/or caliber swaps without machine tools.

SAVAGE MODEL 10 VS 11 SERIES

I have long been a big fan of Savage 110 series bolt action rifles.

Savage model 10 vs 11